All equipments and floor washing will be discharged to the Neutralization collection tank of the Effluent Treatment Plant.
This effluent will be further treated and processed to meet the specifications of BOD/COD laid down by Pollution Control Board before it is sent to common Effluent Treatment Plant.
All the Solvent wastes, organic residues will be sent to Triple Effect Evaporation System.
The contaminated solvents, which cannot be recovered or re used will be sold to authorized outside companies after completing all Excise and State Pollution Control Board Norms.
Solid waste treatment
All solid wastes like carbon, salts from process, utilities and solid residue from ETP and Triple Effect Evaporation System will be collected in containers labeled ‘Hazardous Waste'.
This waste will be safely transported after completing the Hazardous Waste Manifest formalities to common hazardous waste treatment storage and disposal facility.
The used catalyst will be sent for further recovery to outside companies.
Gaseous waste treatment
All vapours will be condensed by efficient Primary, Secondary & tertiary condensers having chilled Water or brine as condensing liquids depending on the boiling point of the solvent.
The gaseous emissions will be sent to Absorption Scrubbers.
The Scrubbers will be installed having flow of dilute alkali or Hypo Chlorite solution or dilute Acetic Acid depending on the nature of effluent gases.
These vent gases will be monitored by different gas sensors installed at the vents of scrubber stacks to ensure the quality of surrounding atmosphere.
